1 / 3
Seesii / Sosisul Spot Welder Station
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Seesii / Sosisul Spot Welder Station
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Spot welder station intended to ease the use of those cheap spot welders.
Material required
Probe Bracket:
- 2x M3x20 machine screws (hold the 2 half brackets together)
- 2x M3 nuts (hold the 2 half brackets together)
- 1 or 2 M3x25 machine screws (hold the probe bracket to the Spring case)
- 2x M3 nuts (hold the probe bracket to the Spring case)
Spring Case - Arm Side:
- 4x M3x10 machine screws (hold spring case to the arm)
Arm Bracket
- 4x M4x15 machine screws (hold the arm to the base)
- 4x M4x15 nuts (hold the arm to the base)
Notes:
- It works better if the probe bracket is fixed to the spring case with just one screw which should be left loose to allow the bracket to rotate. This is required because is challenging to have the tip of the probes at the same level, rotation of the bracket allows the tips to contact the strip more evenly. Would be best to replace the probes with a welding pen equipped with springs at the tips.
- If you wish, you can avoid using the spring case and attach the probe bracket directly to the arm. The spring system is meant to give a visual feedback of how much pressure has been applied to the object
- Spring case parts require lubrication to work smoothly
- Handle has not been tested, it might need to be reworked
- The system is not perfect, it will not produce 100% perfect welds every time
