Mini led flashlight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple to assemble and very useful to hang on your set of keys
- Rating
- 5 / 5
- Likes
- 239
- Downloads
- 1,015
- Makes
- 23
- Views
- 4,131
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Small LED torch to always have on hand or on your keychain to always have a light just in case.
VERY SIMPLE TO PRINT AND ASSEMBLE
PRINTING INSTRUCTIONS:
- MATERIAL : PLA/PET-G
- NOZZLE SIZE : 0.4 mm
- LAYER HEIGHT: 0.10 / 0.15 mm
- VERTICAL SHELLS: 2
- INFILL: 15%
- SUPPORT: NO
- Position the parts as shown in the photo:
Have fun changing colors to the various parts or making a color change during printing
REQUIRED COMPONENTS :
- CR2032 button battery
- 3V led diode 5mm
ASSEMBLY INSTRUCTIONS :
Take the part printed with the symbol - (minus ) and place the battery inside it with the positive facing up as in the photo
place the button you printed on the battery and then the second part with the + symbol
now just twist the piece over and it will lock into place
pay close attention now, the longer leg of the LED is positive, while the shorter one is negative
as you can see in the picture there are 2 small holes into which the legs of the led must be inserted .. the longer leg (positive) must be inserted into the hole on the side where there is the + symbol and the button
to facilitate the insertion of the LED, hold the mini torch with the button facing downwards.
Gently insert the LED all the way in
I ADD A QUICK ASSEMBLY VIDEO