Emisar D2 or Noctigon KR1AA Rugged Storage Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage Case for Emisar D2, D3AA, DW3AA or Noctigon KR1AA flashlight + spare battery or 2x Emisar D2s / KR1AAs
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A rugged storage case for Emisar D2, Emisar D3AA, Emisar DW3AA or Noctigon KR1AA flashlights from Hank Wang
Case can accommodate either 2 flashlights - D2 / KR1AA or one D2 / D3AA / DW3AA / KR1AA + one spare 14500 battery.
This case fits many EDC type flashlights such as S2+ 18350 "Shortie", Wurkkos FC11C Shortie and so on..
A separator made of 2mm EVA foam is placed before closing the case and used to prevent the flashlights from rubbing in each other. Same foam is also used as a liner for the case to ensure snug fit that will not damage the anodization.
1 plate contains all components but can be split for multiple color schemes.
Glow in the Dark PLA can be used for the latches, for example and dual-tone case/lid can be selected.
Gasket is optional - printed with TPU 85A / 90A or alternatively a plain TPU filament with the correct length can be welded in a loop and placed in the gasket grove.
6x 3mm x 30mm machine screws are required to assemble the case.