Emisar DA1, DA1K and KR4 carry case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carry case for the Emisar DA1 series of lights. Includes all battery tubes for DA1 and DA1K. Fits KR4 and Loopgear SK06
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Carry case for the Emisar DA1 and DA1K lights.
The 18650 version fits certain Noctigon KR4 models as well.
The 21700 version fits Loopgear SK06
Case is only for lights with no pocket clip or lanyard ring
Included are models for battery tubes for 18350, 18500 and 18650 (DA1) as well as the DA1K 21700.
Fits all button versions - flat switch ring, raised switch ring and metal button.
PETG recommended.
Requires 2x 10mm panhead-hex M3 machine screws and 4x 4mm x 2mm neodymium pill magnets (source: Amazon)
The GITD Lid version has a slot that can be filled with GITD compound or 3D printed GITD insert.
When using the DA1 18650 with KR4, the insert is placed at the bottom of the tube to facilitate easy light removal
Note: Not all KR4s fit due to variation in the tailcap diameter and head - some Ti and Ti Colorful series lights will not fit or are a very tight fit. Most aluminum body lights as will as some Raw Ti and SW Ti do fit. For a universal KR4 fit, look for the dedicated KR4 case.