1 / 5
Emisar and Noctigon flashing kit cover for D4v2, KR4 and more — zdjęcie 1
1 / 5

Emisar and Noctigon flashing kit cover for D4v2, KR4 and more

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small protective box to fit the flashing kit for Emisar and Noctigon flashlights.

Ocena
0 / 5
Polubienia
8
Pobrania
50
Wydruki
0
Wyświetlenia
291
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Small protective box for the flashing kit for Emisar and Noctigon flashlights. Should also work for other USBASP flashers.

Might require a bit of fitting on the USB connector's hole, I manually enlarged it a bit using a knife, purposefully made it slightly undersized so that the board can't fall off normally. The top cover is friction fit but can be glued with a drop of super glue on the edge to keep it from ever falling off, or wrapped in tape.

Makes it easier to safely plug in whenever a new version of Anduril releases.

Might look cooler in translucent plastic, should be trivial to remove the witness hole in the source file.

Designed using FreeCAD 0.18

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

20%

Filament: Esun PLA+ Doesn't matter


 

Notes:

 

Printed at 70mm/s, might look better if printed slower.

 

 

 

Category: DIY

Tagi