Liczymy pasujące modele…
FULLY MOVEABLE KUKA KR10 INDUSTRIAL ROBOT Consists of 7 separate parts. A great thing to understand the movements of the robotic arm. Each part contains holes for the protrusions of the adjacent part. this design was made by Yokata, the…
Prints in 3 pieces. Glue the clip & ring onto the main body piece. I've used PLA & superglue as of when I'm uploading, and it seems to be holding up fine. A stronger adhesive is probably a better choice though. Remove the black o-ring…
This is a set of different tools to help flashlight bezel removal. I recommend to print them with PETG or ABS/ASA with 5 to 8 perimeters and 0,1 mm layer height. This is a growing collection, so feel free to check back later for tools for…
Still in Beta! - Send me messages/concerns This design builds off a commonly used design by RC-CnC on PrusaPrinters. This improved case includes room for a Pi4B+, uses threaded inserts, allows for 2 x 40mm fans, and utilizes magnets to…
This design builds off a commonly used design by RC-CnC on PrusaPrinters. This improved case includes room for a Pi0, uses threaded inserts, has room for buck converters, allows for a 80mm fan, and utilizes magnets to open and close the…
Model Original found on GrabCad, it doesn't come up when you search in GrabCad so Ithough I would share it here in case somebody is looking. https://grabcad.com/library/bigtreetech-skr-v1-4-1 I did not make this, so I can't claim any…
Maytech MTSKR1905WF Controller / Chargermount
perfect mounts to upgrade Tronxy X5SA with BTT SKR 1.4 Board Fan mount: https://www.printables.com/de/model/686290-btt-skr-14-board-fan-mount PCB for ribbon cable: https://a.aliexpress.com/_mOmbg5E
This is an Electronics front enclosure for Ender 3/Ender 3 Pro, it is designed to fit: Bigtreetech SKR 1.4/1.4 Turbo Rasperry Pi 2/3 4x LM2596 1x Noctua Fan 40x40 The design has been splitted in 4 parts, use selftapping screws 2.5 x 15 mm…
A simple adapter to replace a SKR 1.4 (Turbo) with any SKR E3 Mini using the original mounting holes. I needed this since I switched the SKR1.4 in my Biqu B1 for an SKR E3 Mini v2 and wanted to use the existing mounting holes in the model…
This is an Enclosure for Bigtreetech SKR1.3 and TFT35 V2.0 targeted to MPCNC application. BOM: SKR 1.3 TFT 35 V2.0 Fan 40x40 8x Selftapping screws 2.5 x 10 mm You can find the MPCNC modification of BTT TFT35 FW a the following link:…
Mount for SKR1.4 and 2 Mosfet on 2040 aluminium Extrusion. Printed when installing SKR1.4 and mosfet board. Print instructions Basic print. PETG should be better for solidity
This is a remixed version of the design by InnovationWorkstation . Please check out his work! I liked the original design but I did not have the magnets and the right size of buck converter, so I remixed it and changed the mount for the…
This is a tactical ring for the Noctigon KR1/KR4 flashlight with 18 6 50 battery tube. 18350 version is available here . It replaces the clip or lanyard ring. Assembly is easy: Screw off the tailcap, remove both o-rings and the original…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! This is a flashlight diffuser that distributes the light radially and downward to maximize the usage of the…
4/26/2020 Update: Shrunk download significantly by removing my build libraries, that was dumb, you need to build it anyway. Also tuned down mA on TMC2209's to 790 to eliminate layer shifting issues I was having. Ignore the calibration…
SKR1.3+RaspberryPi electronic box
These are mounts for the SKR1.4, Raspberry Pi 4B, and step-down converter. I made it for my Klipper hardware setup. They are designed as a simple solution for those who cannot or do not want to drill holes or make other modifications for…
This is a remix of the excellent Mitch3D model for Emisar D3AA. The modification allows you to use the case with KR1AA as well. Handy storage / EDC case to protect your Hanklights. Version with the built-in battery holder must be printed…
!!!!! The printed parts are not verfied yet ! !!!!! !!!!! I just made this page in advance before last verification of 3d files !!!!! These are mounts for electronic parts in a typical Klipper hardware setup. There are : Raspberry Pi 4B…
Adapter for the robot KUKA VKR16 R1610-2 (CYBERTECH) to hold the gripper SMC MHZ2-25C. The blueprints of the gripper are on the photos.
This is a tactical ring for the Noctigon KR1/KR4 flashlight with 18 3 50 battery tube. 18650 version is available here . It was designed in two parts to minimize supports. The tube can be simply press-fit into the ring. Then slide it from…
A rugged storage case for Emisar D2, Emisar D3AA, Emisar DW3AA or Noctigon KR1AA flashlights from Hank Wang Case can accommodate either 2 flashlights - D2 / KR1AA or one D2 / D3AA / DW3AA / KR1AA + one spare 14500 battery. This case fits…
skr1.3, orange pi zero2 mount for voron v0.1
https://www.3djake.it/bigtreetech/dc-dc-stepdown-module
This is a wall-mounted dock for the Noctigon KR1. I printed it with the following settings. Filament: PETG Infill: 15% The holes and chamfers are sized for standard #8 screws.
This is a ring to attach a lanyard to the Noctigon KR1/KR4 with 18 3 50 battery tube. Just screw off the tailcap, slide it over the tube (yeah, now it has three tubes!) and screw the tailcap back on. I designed it so that it can be…
This clip allows the user to add various models Hanklight flashlights as supplemental lighting to Donegan OptiVisor. Based on the flashlight model either top-mounted or side-mounted configurations are possible. Two versions are available…
material PLA / PETG nut m3 the right_top_v49 file must be reversed in the program to get the left side item to be glued or welded with plastic staples without mounting on raspberry
Remix of the design, I removed the plug cavities on the back and added holes for direct wiring. I removed the fan on the top. I removed the Ender logo from the front and added a grill for front to back flow. There are two left side…
Derived from another KR180 model I found online, with holes fixed for better slicing. I thought I uploaded these files in December 2012. Something must have happened to them :O See also…
I made this bracket to hold a blower fan pointing at the heatsinks on the SKR V1.2 Pro board I have on my ratrig vcore 3 printer
