Noctigon KR1AA or Emisar D3AA and D2 EDC / Storage case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EDC / Storage case for Hanklights - Noctigon KR1AA and Emisar D3AA and Emisar D2 cases. Also fits Wurkkos TS10
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the excellent Mitch3D model for Emisar D3AA. The modification allows you to use the case with KR1AA as well.
Handy storage / EDC case to protect your Hanklights.
Version with the built-in battery holder must be printed with Support enabled.
Requires M3x 16mm machine screw (M3x18mm will work also with a nut)
Alternatively, for best aesthetics - 2x M3x8mm panhead hex screws can be threaded in the hinge - one from each side. This gives a nice, finished look that is same on each side.
4x 3x3mm magnets of 8x 3x1.8mm or 4x 3x1.8mm magnets.
1 or 2 layers of 2mm EVA foam disks should be placed on the bottom of the battery holder to act as spacer / spring for the battery.
The 3MF file includes negative parts so be careful when moving geometry on the plate.
Glow-In-the-Dark Lid accent is optional - glued in the lid. Only works for the standard version (without the battery holder)
There is a Magnetic Ejection version for lights with a tail magnet. A user-reversible magnet can be installed (18x3mm neodymium magnet is required) to eject the light at opening the case or provide extra retention
uxcell silicone foam seal strip 1.5mm for the boxy case (Amazon)