Christmas Diffusers for Emisar D4V2 & D4K, Wurkkos TS10, Convoy T3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your house extra cozy this Christmas with these cute flashlight diffusers!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can buy these from me here!
Consider giving us a 1 time donation if you like this model!
These are very challenging prints due to the use of multiple 3D modelling software involved in the design of these items.
I highly recommend opening the PROJECT files as projects using PrusaSlicer to see how the prints are plated and assembled.
The Present model is the easiest to print.
I have uploaded the raw .STL files, and I have also uploaded my .3mf PROJECT files.
Some of the raw .STL files do not have the holes for the light made in them, but the .3mf files do have the holes and proper infill defined in them. Please open the .3mf files as a project in PrusaSlicer!
The project files have specially placed support modifiers to make the diffuser look as good as possible.
These models are printed at 0.15mm layer height using PETG from California Filament.
I have not had any issues with melting even when the light is on turbo, but I can't guarantee that your light will behave the same!