Emisar D18 Spacer for flat top batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spacer to use flat top 18650 batteries in the Emisar D18 flashlight
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A spacer to use flat top 18650 batteries in the Emisar D18, without taking the polarity protection rings off. Hard to get high quality button top 18650 batteries where I live so I designed this.
Takes 10mm diameter cylindrical spacers, taller than 2mm. I used some spare neodymium magnets but brass or copper spacers would be ideal for a reduced electrical resistance.
FreeCAD file allows customization for smaller spacer diameters, 10mm is the biggest that works without being too fragile.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Esun PLA+ Doesn't matter
Notes:
Be careful not to bend the part when removing from the printer bed, it is a bit fragile.
Print with the "battery side" up
Category: Sport & Outdoors