Diffuser for Convoy S21A flashlight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of this (https://www.thingiverse.com/thing:2957181) Diffuser for Convoy S series (high resolution version), so…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 509
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of this (https://www.thingiverse.com/thing:2957181) Diffuser for Convoy S series (high resolution version), so it can fit on my Convoy S21A.
I recommend reading Summary of the original project.
I don't think it's needed, but I used some type of raft for better adhesion.
I also recommend .12 layer height because of problems caused by internal overhangs on .20 layer height.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.10-.20
Infill:
0%
Filament: Plast-Spaw PLA White
Notes:
I set thickness to 2 lines (for good light transmittance) but as the author said in the original part comments section, you can experiment with that.
Category: Tools