Flashlight Cap (fit to Convoy S2+)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The cap on the flashlight cuts off the light so you won't dazzle with strong light.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 171
- Wydruki
- 1
- Wyświetlenia
- 740
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The cap on the flashlight cuts off the light so you won’t dazzle with strong light.
It does not reduce the flashlight’s range, but only cuts off the upper half of the light beam.
On the attached photos, you can see how it works. The first one was taken with a cap, the second one with no cap.
I made my version of this cap because the others were flawed.
My version does not need to be inserted into hot water to be put on the flashlight like other projects. It can be easily and quickly removed at any time.
This design is also better because it forms light much better, so that it does not dazzle others.
It has a 24mm diameter and fits the Convoy S2+, but after scaling, it should fit any other flashlight.
I recommend the use of filements: PETG, ABS, ASA.