Convoy M21B Battery Saver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Help stop the battery from being impaled by the brass post if flashlight is dropped.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 2
- Wyświetlenia
- 384
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Install around the brass post of the Convoy 20A driver found on the M21B LHP73B flashlights. In theory it will reduce the amount of damage to the battery if the light lands head first. This design is found on some other tactical style lights so I thought why not try it for this.
I printed mine from PETG with 5 walls and 30% infill to make it at tiny bit flexible, I would recommend anything high temp as the LHP73B gets too hot in seconds.
The 4/3.5mm worked well for mine with flat top EVE 50PL 21700, the holes are there so you can remove it with some needle pliers.
Use at your own risk. I have not test dropped mine yet and don't plan on doing it.