1 / 11
Glare free Bike Light – Filippa TIR Lens + Convoy S6 Mod (Sub-20€ Build) — zdjęcie 1
1 / 11

Glare free Bike Light – Filippa TIR Lens + Convoy S6 Mod (Sub-20€ Build)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printed adapter to turn a cheap but powerful flashlight into a glare free and lightweight bike lamp.

Ocena
0 / 5
Polubienia
27
Pobrania
63
Wydruki
0
Wyświetlenia
3761
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Deutsche Version weiter unten: 

I thought it might be interesting for others to see what I have been working on as a small side project:

I live in the northern hemisphere and I do some road cycling. Unfortunately, during spring and autumn there is very little daylight left after work, so I decided that I needed a capable bike light that is small, lightweight, but still powerful. I also wanted a removable battery, because some rides can get quite long and I don’t want to carry a second light just because the battery is not replaceable. In addition, batteries age over time and often become the reason why a light stops being usable altogether.

Another important requirement for me was glare free lighting. Many other bike lights are bright, but they scatter the light, which can blind oncoming traffic and make it harder for them to see the path clearly. Also, the light is used more efficiently when concentrated in the distance. 

Surprisingly, not many bike lights offer removable batteries. The Lumintop B01 does, but it is definitely not anti-glare as claimed (see: https://fahrradbeleuchtung-info.de/testbericht-lumintop-b01). There is the Towild BR series (no longer manufactured and also not really anti-glare), and the Volume 1500 from Bookman Visibility (not anti-glare and costs around 150 €).

Then there are the premium road bike options such as the Lupine SL Grano (>200 €), Cateye Volt (~60 €), and Supernova (~160 €). However, none of these feature removable batteries either. This always leads to a trade-off between brightness, battery life, and weight.

So I decided to take a different route.

By accident, I stumbled across an STVZO-style lens called the Filippa lens by LEDiL. It is not officially certified, but that is expected because certification only applies to the final product and also depends on the LED emitter used. It is a TIR lens, which means it has higher optical efficiency than a simple projector lens and is a lot smaller than a reflector. This means it should not be used on public roads in Germany. 

They provide a good datasheet, so the next step was to find a suitable emitter: small emitting area, high efficiency, no weird tint, and available in a flashlight. After some searching, I found convoylight.com, which offers decent quality lights at very reasonable prices (this is not bike-tech pricing, but normal-people pricing).

The last missing piece was the mechanical part: designing and building an adapter to mount the Filippa lens onto the flashlight. I am not 100% happy with the current design yet (mainly because it requires too many screws), but it works as a prototype. There is probably a more elegant way to attach the 3D-printed parts to the flashlight body.

Required recommended hardware:
  • 1x Filippa STVZO lens (~3 €)

  • 1x Flashlight: Convoy S2+ (~16 €)

    • Aluminium housing

    • SFT 40 Emitter with Light temperature you prefer (I would recommend 5000K) or
      KW CSLPM1.TG

    • 5 A buck driver

    • 18650 cell of your choice

  • 3x Torx screws DIN 7981, 2.2 x 9.5 mm

  • Household silicone (for waterproofing)

Assembly:

Building it is fairly straightforward:

As seen in the pictures, first remove the driver and reflector plus glass from the head of the flashlight. Screw the driver all the way back in and measure, how much you need to saw off. Subduct 2mm for safety, remove the driver again and cut the tube. I also lightly sanded the area. After that, reinstall the driver, mount the 3D-printed parts and seal with silicone.
Done.

Additional info: 
  • I included some beam shots from actual bike rides. The light is very bright — even 35% power is more than sufficient for fast night riding. I included a picture of the beam of a sigma aura 45 and the comparison at 100% with same shutter speed, iso, etc. 

  • One downside is that the light does not have a built-in charging port. You need an external 18650 charger. I use a Yonii PD2, which doubles as a power bank. You can store two cells in it, charge them via USB-C, or use them to charge your phone or bike computer.

  • I decided not to go with 21700 cells, yes they have a bit more capacity but not by a long shot and I had some spare 18650 cells laying around. 21700 cell will give you approximately 1.5 times more capacity. 

  • I included the .step, so feel free to improve the current design! 

Overall, I’m very happy with the result.

PS: I used some LLM to go over my text as it would have been a mess to read. If it leaves some questions open, just let me know :) 

Disclaimer: This DIY project is for educational and off-road purposes only. The resulting device is NOT certified (e.g., K-Mark/StVZO) for use on public roads. Build and use at your own risk. I am not responsible for any damage, injuries, or legal consequences resulting from the assembly or use of this project.

Deutsche Version: 


Leider gibt es im Frühling und Herbst nach der Arbeit nur noch sehr wenig Tageslicht, also habe ich beschlossen, dass ich ein leistungsfähiges Fahrradlicht brauche, das klein, leicht und trotzdem hell ist. Außerdem wollte ich einen wechselbaren Akku, da manche Touren recht lang werden können und ich nicht extra ein zweites Licht mitnehmen möchte, nur weil der Akku nicht austauschbar ist. Zusätzlich altern Akkus mit der Zeit und sind oft der Grund, warum eine Lampe irgendwann gar nicht mehr sinnvoll nutzbar ist.

Eine weitere wichtige Anforderung für mich war blendfreies Licht. Viele andere Fahrradlampen sind zwar hell, streuen das Licht aber stark, was den Gegenverkehr blenden kann und es für diesen schwieriger macht, die Straße gut zu erkennen. Außerdem wird das Licht effizienter genutzt, wenn es gezielt in die Ferne gebündelt wird.

Überraschenderweise bieten nicht viele Fahrradlampen wechselbare Akkus. Die Lumintop B01 tut das zwar, ist aber definitiv nicht so blendfrei wie behauptet (siehe: https://fahrradbeleuchtung-info.de/testbericht-lumintop-b01). Dann gibt es noch die Towild-BR-Serie (wird nicht mehr hergestellt und ebenfalls nicht wirklich blendfrei) sowie die Volume 1500 von Bookman Visibility (nicht blendfrei und kostet etwa 150 €).

Daneben existieren Premium-Optionen für Rennräder wie die Lupine SL Grano (>200 €), Cateye Volt (~60 €) und Supernova (~160 €). Allerdings haben auch diese keine wechselbaren Akkus. Das führt immer zu einem Kompromiss zwischen Helligkeit, Akkulaufzeit und Gewicht.

Also habe ich mich entschieden, einen anderen Weg zu gehen.

Durch Zufall bin ich auf eine StVZO-ähnliche Linse namens „Filippa“ von LEDiL gestoßen. Sie ist nicht offiziell zertifiziert, was auch zu erwarten ist, da sich die Zertifizierung immer auf das Endprodukt bezieht und zudem vom verwendeten LED-Emitter abhängt. Es handelt sich um eine TIR-Linse, was bedeutet, dass sie eine höhere optische Effizienz als eine einfache Projektorlinse hat und deutlich kleiner als ein Reflektor ist. Deshalb sollte sie in Deutschland nicht im öffentlichen Straßenverkehr verwendet werden.

LEDiL stellt ein gutes Datenblatt zur Verfügung, also war der nächste Schritt, einen passenden Emitter zu finden: kleine Leuchtfläche, hohe Effizienz, keine merkwürdige Farbtemperatur und verfügbar in einer Taschenlampe. Nach einiger Recherche bin ich auf convoylight.com gestoßen, die ordentliche Qualität zu sehr fairen Preisen anbieten (keine typischen „Bike-Tech-Preise“, sondern normale Preise).

Das letzte fehlende Teil war der mechanische Part: das Design und der Bau eines Adapters, um die Filippa-Linse an der Taschenlampe zu befestigen. Mit dem aktuellen Design bin ich noch nicht zu 100 % zufrieden (hauptsächlich, weil zu viele Schrauben nötig sind), aber als Prototyp funktioniert es. Es gibt wahrscheinlich eine elegantere Möglichkeit, die 3D-gedruckten Teile am Lampengehäuse zu befestigen.

Empfohlene benötigte Hardware:

  • 1× Filippa STVZO-Linse (~3 €)

  • 1× Taschenlampe: Convoy S2+ (~16 €)

    • Aluminiumgehäuse

    • SFT40-Emitter mit gewünschter Lichtfarbe (ich empfehle 5000 K) oder KW CSLPM1.TG

    • 5-A-Buck-Treiber

    • 18650-Akku nach Wahl

  • 3× Torx-Schrauben DIN 7981, 2,2 × 9,5 mm

  • Haushalts-Silikon (zur Abdichtung)

Zusammenbau

Der Aufbau ist recht einfach:

Wie auf den Bildern zu sehen, entfernt man zuerst den Treiber sowie Reflektor und Glas aus dem Kopf der Taschenlampe. Danach den Treiber wieder vollständig einschrauben und messen, wie viel vom Rohr abgesägt werden muss. 2 mm Sicherheitsabstand abziehen, den Treiber erneut entfernen und das Rohr kürzen. Ich habe die Schnittstelle anschließend leicht angeschliffen. Danach den Treiber wieder einsetzen, die 3D-gedruckten Teile montieren und alles mit Silikon abdichten.
Fertig.

Zusätzliche Infos

  • Ich habe einige Beamshots von echten Fahrten beigefügt. Das Licht ist sehr hell – selbst 35 % Leistung reichen für schnelles Nachtfahren völlig aus. Außerdem habe ich ein Vergleichsbild mit einer Sigma Aura 45 sowie einen Vergleich bei 100 % Leistung mit identischen Kameraeinstellungen (gleiche Belichtungszeit, ISO usw.) eingefügt.

  • Für die Befestigung am Lenker hatte ich bereits eine eigene Halterung. Es gibt aber viele gute Modelle online, zum Beispiel: Handlebar-mount-for-garmin-devices-or-compatibles

  • Ein Nachteil ist, dass die Lampe keinen integrierten Ladeanschluss hat. Man benötigt ein externes 18650-Ladegerät. Ich nutze ein Yonii PD2, das gleichzeitig als Powerbank dient. Man kann zwei Akkus darin lagern, sie per USB-C laden oder damit Smartphone bzw. Fahrradcomputer aufladen.

  • Ich habe mich gegen 21700-Akkus entschieden. Ja, sie haben etwas mehr Kapazität, aber ich hatte noch einige 18650-Zellen herumliegen. Ein 21700-Akku bietet ungefähr die 1,5-fache Kapazität. 

  • Ich habe außerdem die .step-Datei beigefügt – verbessert das Design also gerne!

Insgesamt bin ich mit dem Ergebnis sehr zufrieden.

Disclaimer:

Dieses DIY-Projekt dient ausschließlich zu Lern- und Offroad-Zwecken. Das resultierende Gerät ist nicht zertifiziert (z. B. K-Prüfzeichen/StVZO) für den Einsatz im öffentlichen Straßenverkehr. Bau und Nutzung erfolgen auf eigene Gefahr. Ich übernehme keine Verantwortung für Schäden, Verletzungen oder rechtliche Konsequenzen, die aus dem Bau oder der Nutzung dieses Projekts entstehen.

Tagi