Sony HT-S40R pivoting ceiling rear speaker holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thing needed to hold the satellite rear speakers of the Sony HT-S40R to the ceiling allowing to rotate them.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 624
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of the following 3 projects that all contributed to creating what I needed:
- https://www.printables.com/model/427857-samsung-home-theater-ceiling-mount: this gave me the wall support part + the sliding insertion mechanism, which I rotated 45° upwards to get the pivoting part horizontal
- https://www.thingiverse.com/thing:4267299: this gave me the pivoting capability
- https://www.thingiverse.com/thing:6516357: this gave me the little dent that holds the speaker in place
I mixed them all together to make a ceiling support that holds the Sony HT-S40R rear speakers with pivoting capability to better orient them.
Print Settings
- Printer brand: Bambulabs
- Printer: Bambu X1C
- Rafts: No
- Supports: Yes
- Resolution: 0.12mm
- Infill: 25%
- Filament brand: Polymaker Polyterra
- Filament color: White
- Filament material: PLA+
- Notes:
I printed the parts with tree supports enabled.
I have attached the .3mf project file as well.
If you don't want to use it, print the left/right sides accordingly (if you are close to a wall edge it matters!) and twice the "Speaker holder" stl file.
You will need:
- 8 M3.5x16 countersunk screws to attach to the wall each adapter
- 2 M6x30 screw to attach the pivoting parts
- 2 M6 nut