1 / 1
Sony HT-S40R pivoting ceiling rear speaker holders
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thing needed to hold the satellite rear speakers of the Sony HT-S40R to the ceiling allowing to rotate them.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 38
- Makes
- 0
- Views
- 624
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
This is a remix of the following 3 projects that all contributed to creating what I needed:
- https://www.printables.com/model/427857-samsung-home-theater-ceiling-mount: this gave me the wall support part + the sliding insertion mechanism, which I rotated 45° upwards to get the pivoting part horizontal
- https://www.thingiverse.com/thing:4267299: this gave me the pivoting capability
- https://www.thingiverse.com/thing:6516357: this gave me the little dent that holds the speaker in place
I mixed them all together to make a ceiling support that holds the Sony HT-S40R rear speakers with pivoting capability to better orient them.
Print Settings
- Printer brand: Bambulabs
- Printer: Bambu X1C
- Rafts: No
- Supports: Yes
- Resolution: 0.12mm
- Infill: 25%
- Filament brand: Polymaker Polyterra
- Filament color: White
- Filament material: PLA+
- Notes:
I printed the parts with tree supports enabled.
I have attached the .3mf project file as well.
If you don't want to use it, print the left/right sides accordingly (if you are close to a wall edge it matters!) and twice the "Speaker holder" stl file.
You will need:
- 8 M3.5x16 countersunk screws to attach to the wall each adapter
- 2 M6x30 screw to attach the pivoting parts
- 2 M6 nut