Kingsong 16X Side pads with access holes for bolts (STL+DXF)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement side pads for Kingsong 16X Including holes for the bolts so you won't have to remove the side pads again…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Replacement side pads for Kingsong 16X
Including holes for the bolts so you won't have to remove the side pads again if you want to open up your 16X.
Printing in TPE is okay, but lasercutting a rubber material would be best since the edges have slight curves. I used 1mm SBR rubber.
For additional info and/or questions see:
https://forum.electricunicycle.org/topic/23474-kingsong-16x-collection-of-custom-or-altered-3d-models
Print Settings
Printer Brand:
Creality
Printer:
CR-10
No
Supports:
No
0.2
Infill:
25
Filament:
ESUN TPE Black
Notes:
Print in TPE or laser cut in something rubbery.
Category: Hobby