10" Replacement Case for DrayTek Vigor 167 Modem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10" rackmountable replacement for the Case of the Draytek Vigor 167. Other draytek models might work but are untested.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 845
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a drop-in replacement enclosure for the original Vigor 167. The modem uses a single PCB, so the swap is quick and straightforward. Handle the PCB with care, there’s a high-voltage section with its own protective cover. make sure to transfer and reuse that cover in the new case.
LEDs / Light Guides
If you’d like the front LEDs to remain visible, print the light guides in clear PETG and glue them in place. Print the guides on their sides so the layers help transmit light.
Material Recommendation
Avoid PLA due to its low heat resistance and the unknown operating temperatures of the electronics. Use PETG, ABS/ASA, or similar heat-tolerant materials instead.