EleksMaker Mana SE Replacement top plate for tall capacitors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The 16V capacitor blew on my Mana SE board so I needed a replacement. (Never move the stepper motors when they are…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The 16V capacitor blew on my Mana SE board so I needed a replacement. (Never move the stepper motors when they are unpowered and attached to the board..)
Hardware store only had tall ones and because of that the top plate didn't fit anymore.
I made new top plates and also made the original one.
There are plates for a 16v replacement, 6.5v replacement or both.
Sidenote: On the pictures the opening for the stepper drivers is incorrect. The dimensions for the stl's I uploaded here are correct.
Category: Electronics