22 modeli
I have an A5 laser engraver and wanted the acrylic plates in some form of digital format so I could modify then. Well, Here they are!!!! The STL files were made by importing the attached DXF files into Fusion 360 and extruding them. All…
EleksMaker Laser Engraver Feet Mounts Foot mounts for 7.85mm acrylic Height 20mm 3.45mm screw hole Print Settings Supports: No Infill: 20% Category: Machine Tools
So, I needed to raise my laser engraver to accommodate some product. I have been just using some kitchen counter sample pieces to raise the machine, but that is a very inelegant way of doing it. So I have made these leg extensions. You…
With this two line lasers can be attached to the laser head of the eleksmaker a3. https://www.thingiverse.com/thing:2799052 Happy printing MFG Chris Follow me on... prusaprinters.org thingiverse Instagram If you like it ;) - Thx for me!…
This is a mount for the 500w spindle that you can easily find on Aliexpress. Be sure to align it perfectly or the Z Axis stepper motor won't be able to lift it. If perfectly aligned works like a charm, my suggestion is to mount everything…
Adapter to fit the Opt Lasers PLH3D-6W to the Z-Axis Kit from Eleksmaker. You can use the scad as a general template for modifying the Z-Axis Kit. The tolerances are important to work good. Use the test module of the scad to check you…
Original design was WAY too big for the A3 Pro laser carriage. This is a remix but I designed this one from scratch using the original as a guide. Using some split flex tubing (http://amzn.to/2zpLMPd) the cable stays upright and doesn't…
Remixed to fit the A3 Pro 2500mw laser. It is a friction fit that is just a tad loose so I used some tape to fill the gap. If there is interest I can make it tighter.
Simple X-Endstop holder Category: Tools
EleksMaker Laser A3 Pro - Y-Endstop Holder Category: Tools
I've replaced the stepper drivers on my A3 Pro with some TMC2100. to cool down the heatsink i needed a fan, so here I designed this ManaSe cover with a support for the fan placed on the side. the fan is a Noctua 40x40 5V, powered by the…
EleksMaker - A3 Pro - Y-Cable Clip Category: Tools
Easy to print legs and extensions, to give extra height on the laser. Also, some small clips to tidy the cables up, the backbone of the cable clips is just a cable tie to give some stiffness. Cable ties used are 370mm x 7.4mm x 1.4mm…
this is the x carriage tension adjuster mod for the newer eleksmaker lasers with the open build wheels. It requires you to use the 2 M5 bolts and nuts that came with the machine at the pivot. At the top corner you need two m3 bolts. At…
All cables of the Eleksmaker must be extendet. I used my "cable chain with clip 22x30x15" https://www.printables.com/de/model/159801-open-cablechain-with-clip-22x30x15mm Print Settings Printer: Geeetech A10 Rafts: No Supports: No…
EleksMaker A3 Footholder Category: DIY
A quick and dirty enclosure for my Eleksmaker Mana 5.2 board. I use it on a cheapo LED laser engraver to be able to run LaserGRBL and make PCB's Box is tight but it is still possible to connect and disconnect wiring with some finger…
The 16V capacitor blew on my Mana SE board so I needed a replacement. (Never move the stepper motors when they are unpowered and attached to the board..) Hardware store only had tall ones and because of that the top plate didn't fit…
Simple replacement for the perspex Mana SE base plate since mine cracked. The same physical size but integrated the bottom spacers into the print and added a 10mm extension with new bolt holes on the cable side for cable management…
EleksMakers A3 PRO AND Sculpfun S9 laser module owners can see the point here! If you have big fingers like I have it's almost impossible to tighten/loose those screws each time you change material so I decided to print myself a small…
slightly different size from the 2.5w. not all files are needed, only print whats needed Category: 3D Printer Parts
EleksMaker Laser A3 Pro Cable Support for RAMPS and MANA SE I used for the MEGA2650 and RAMPS: https://www.thingiverse.com/thing:1152681 And this Thing is a Remake of: https://www.thingiverse.com/thing:2597229 Category: Tools
