500W Spindle mount for Eleksmaker EleksMill CNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the 500w spindle that you can easily find on Aliexpress. Be sure to align it perfectly or the Z…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a mount for the 500w spindle that you can easily find on Aliexpress.
Be sure to align it perfectly or the Z Axis stepper motor won't be able to lift it. If perfectly aligned works like a charm, my suggestion is to mount everything without tightening the screws, give it a couple of full Z Axis rides and then slowly tighten the screws with the spindle at the middle of the Z axis.
This spindle is a true beast, and turns the EleksMill into a real CNC. It eats really everyting, wood, acrylic, and even Aluminium. Now I can make flawless PCBs in minutes!
I will soon make an adapter for the EleksMaker laser module.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
Yes
Resolution:
.4 mm
Infill:
30% tri-hexagon
Filament:
Generic PLA
White
Notes:
I used a .6mm nozzle for speed and to improve the mechanical resistance, with great success.
Shell width: 1.8mmTop and bottom layers: 2mm (at 30mm/sec)
The final print weights about 100 grams and it's rock solid
Category: DIY