EleksMaker A5 Laser Engraver Acrylic Part Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have an A5 laser engraver and wanted the acrylic plates in some form of digital format so I could modify then.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 792
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I have an A5 laser engraver and wanted the acrylic plates in some form of digital format so I could modify then. Well, Here they are!!!!
The STL files were made by importing the attached DXF files into Fusion 360 and extruding them. All STL files are 6mm thick.
I have included the STL and DXF files. I have also included a modified version of the X axis laser mounting plate that will allow for the X axis motor to be installed above or below the 4020 rail and allow for all three screws on the laser module to actually be used.
I have not printed these on a 3D Printer but did use these DXF files to laser cut the X axis mounts. So far, so good.