EleksMaker A5 Laser Engraver Acrylic Part Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have an A5 laser engraver and wanted the acrylic plates in some form of digital format so I could modify then.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 111
- Makes
- 0
- Views
- 798
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
I have an A5 laser engraver and wanted the acrylic plates in some form of digital format so I could modify then. Well, Here they are!!!!
The STL files were made by importing the attached DXF files into Fusion 360 and extruding them. All STL files are 6mm thick.
I have included the STL and DXF files. I have also included a modified version of the X axis laser mounting plate that will allow for the X axis motor to be installed above or below the 4020 rail and allow for all three screws on the laser module to actually be used.
I have not printed these on a 3D Printer but did use these DXF files to laser cut the X axis mounts. So far, so good.