Eleksmaker A3 PRO/Sculpfun S9 Laser module security screws helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just an helper to tighten/loose your S9 laser module security screws for those who have big fingers, like me!
- Ocena
- 1 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
EleksMakers A3 PRO AND Sculpfun S9 laser module owners can see the point here!
If you have big fingers like I have it's almost impossible to tighten/loose those screws each time you change material so I decided to print myself a small helper to operate aside the laser.
Once printed position one to the right pointing up and parallel-ish to the laser module guide, the other one on the opposite screw, pointing down. Mark them Open/Close accordingly.
Every time you would change material and laser height you simply loose the two helpers in the Open position, move the module height and tighten them back to close position. Quick and dirty.
See pics for reference.
Enjoy it & Happy printing!
Felix
PS models printed with PLA, 210° nozzle, 50° bed, 1mm top layer and 80% infill (less than 1gr each ;))