modular microcontroller and breadboard holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular system to hold your Uno/Nano and ESP32 in place while you tinker with a breadboard.
- Ocena
- 5 / 5
- Polubienia
- 431
- Pobrania
- 848
- Wydruki
- 4
- Wyświetlenia
- 6156
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modular holder system compatible with an Arduino Nano, Arduino Uno, or ESP32.
You can customize the setup by combining the microcontroller holder with the breadboard holder according to your needs.
Simply connect the two modules as shown in the pictures.
If the tolerances don't keep the holder in the desired angle, you can use a filament string, as demonstrated in the picture, or apply glue for extra stability.
The microcontrollers are secured with M3 6mm screws.
If you have a different microcontroller, you can use my universal adapter to hold it.
https://www.printables.com/model/1044517-universal-microcontroller-adapter