Faher to Somfy blinds/screen motor adapter 63mm round tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for replacing your Faher blinds motor with a Somfy (smart) blinds/screen motor on a 63mm round tube
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
The blinds in my daughters room took ages to lower with a manual switch so I decided to change out the manually controlled motor with a wirelessly controlled Somfy IO motor. (so that with one press of a button it goes all the way instead of having to hold down the switch)
But apparently the original Faher motor in the blinds had a far longer adapter to connect the encoder to the tube and it did not fit the Somfy motor.
This meant the motor was sitting too far inside the tube and got in the way of the screen cloth. So I made an adapter to get the motor back to it's correct position
The only thing this does in comparison to the original Somfy encoder adapter (pic below) is that the motor sits 19,5mm farther out of the tube.
Print it strong with many walls and a filament that can handle some heat because it gets toasty inside of the aluminium box