Liczymy pasujące modele…
Horizontal blinds controller - no more hanging chains on windows. To open the blind, just turn the controller. To connect both parts just insert a piece of filament. You can choose two designs of rotate part. The static part is the same.…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Simple cord pulls that were printed with PETG. These were made to replace missing cord pulls of the same shape. The center pull in the picture is an original pull made out of wood.
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made a holder for the wooden slats on the terrace.
These pulleys are designed for chain drive roller blinds. The original pulleys supplied with the blinds often skip steps, are noisy and do not support larger and heavier blinds. Use the pulley corresponding the size and weight of the…
Flat sided - to print on its side for layering strength. The number on the bottom of the original pull tab - P15BH2 I included a 5mm thick test part so you can check the fit before final printing. I'm not sure if there are more than one…
A clip for attaching the trim piece to the top of Levolor window blinds. Two different versions included but V2 works better in most cases. Printed in clear PLA at 0.2mm layer height.
Skoda Octavia 5e Blindstopfen Anhängerkupplung
Support needed. It might be necessary to thicken some parts of the model when printing with FDM (because of the weaker layer adhesion in Z-Axis). I have added a second version for that. Use ASA, ABS or similar material to prevent…
Two different type of end caps for the bottom rail of zebra blinds. Unfortunately I do not know the name of the brands they fit.
Holds the string of window blinds. Print instructions 1) Print same orientation as the picture 2) Nozzle 0.4mm > as a draft (0.3mm) but you can print with more detail (ex 0.15mm) 3) Possible to print more than 1. I like to print a 3x3…
Print with 0.2mm profile, Arachne wall generator and Manual supports.
You can grab a code and get more info about the project here https://github.com/Andryushik/blinds_homekit_esp32 Created for regular window blinds. With Planetary gearbox (you need 3 x planet_gear for 1 set). You need three M3 bolts with…
The standard mounting for roller blinds doesn't hold well with double-sided tape, so I made a reinforced mount that can be attached using double-sided tape
Neberte to vážně, doslovný překlad je pouze vtipem
It's my very first project. (please be gentle) :-) I tried to change the original with 'tinker cad' online For the settings I used : - Wall loops : 5 - Sparse infill pattern : Honeycomb - Enabled Support : YES Style : Snug
Replacing part for blinds. The original one was weak and snapped. Adjust width accordingly to your window size.
The original tassel fell apart. I printed in PLA - there is no way it'll be worse than original. Ideally you should print in PETG, but if you only have PLA don't hesitate to use it. Worst case scenario you replace them every 3-4 years.
spare parts for roller blind printed in PLA
I bought these blinds very cheaply from amazon and automated them using Nema17 motors and ESPHome. Many cheap blinds come with exactly the same layout. You will need some experience with electronics to make this project work. Components…
The clutch was a bit redesigned (less sharp edges) and print settings was optimized in order to reduce efforts to insert blinds beads. Print parameters: 0.16mm layer height, 2 wall, 15% rectilinear infill It was printed in PETG (to…
Simply print and stick to the bottom of your blind opener to stop your blinds getting caught. Designed to fit the Moes ZigBee blinds opener, should fit others too. Printed narrow so the ports and open tab can still be accessed. Scale it…
Replacing part for blinds. The original one was weak and snapped. Adjust width accordingly to your window size.
Simple cord pulls that were printed with PETG. These were made to replace missing cord pulls of the same shape. The center pull in the picture is an original pull made out of wood.
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a puzzle, but instead of a picture, i printed the Braille alphabet on the pieces. It can be used as a nice gift for blind friends or relatives. The 2 dots on the left upper corner (the horizontal and vertical sides of the frame),…
I have several blinds around the house that use the Eve Motionblinds upgrade motor. My issue is that for the 38mm tube, especially the single slot version, positioning the motor centrally in the tube can be hit and miss. The motor itself…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
The little plastic retainer/tensioner part for the cord running down the height of the window, for "tiltable" blinds.
I wore through the original flimsy fittings so i designed and printed new more wear resistant versions
obfuscurity's clip with a longer arm and bigger blind clip
The standard mounting for roller blinds doesn't hold well with double-sided tape, so I made a reinforced mount that can be attached using double-sided tape
My (żaluzje) blinds holder (one of 2) broke so I recreate the working one on tinkercad. 2 photos of my print, 2 photos of the working holder and a single photo of broken one. Model is recreating "V10" 19x25mm horizontal blinds Space…
I converted a 25mm thick closet bifold door to french doors by duplicated the bifold hardware on both sides (I didn't want to mount hinges). I made this door catch to keep the new french doors from swinging too far inward as well as…
It's my very first project. (please be gentle) :-) I tried to change the original with 'tinker cad' online For the settings I used : - Wall loops : 5 - Sparse infill pattern : Honeycomb - Enabled Support : YES Style : Snug
You can grab a code and get more info about the project here https://github.com/Andryushik/blinds_homekit_esp32 Created for regular window blinds. With Planetary gearbox (you need 3 x planet_gear for 1 set). You need three M3 bolts with…
A replacement for RV blinds cord retainer/tensioner. It was designed dimensionally to what I had in my RV, but I'm guessing it's fairly standard. It is held in place by the same style of screw that would have been in the original part in…
Size 1 : 25mm x 50mm x 25mm Size 2 : 25mm x 50mm x 20mm Opening : 25mm
german version below This two models feature a full set of spare parts for the mounting parts of MHZ pleated blinds. Since our ones start to break after 20 years of use. The Clip is quite tight but should hold the pleated blinds. Reuse…
I needed to remove my window blind holders and broke some of them in the process. These parts are manually modeled after the original ones and are designed to be as much as identical as possible with minor adjustments to make them easier…
součástku žaluzie jsem již nikde nenalezl v nabídce prodejců náhradních dílů, nezbylo než navrhnout náhradu
Quick fix for broken plug on my blinds. Clean with a drill bit after printing. Size in mm.
The original tassel fell apart. I printed in PLA - there is no way it'll be worse than original. Ideally you should print in PETG, but if you only have PLA don't hesitate to use it. Worst case scenario you replace them every 3-4 years.
I have some Bali branded ZWave motorized shades that came with 12V battery packs wired to USB micro B connectors (a great way to destroy devices that expect USB 5V power). The battery packs have 8 AA batteries each, and some shades came…
Print with 0.2mm profile, Arachne wall generator and Manual supports.
Holds the string of window blinds. Print instructions 1) Print same orientation as the picture 2) Nozzle 0.4mm > as a draft (0.3mm) but you can print with more detail (ex 0.15mm) 3) Possible to print more than 1. I like to print a 3x3…
A little replacement knob for my venetian blinds. Swedish style.
Horizontal blinds controller - no more hanging chains on windows. To open the blind, just turn the controller. To connect both parts just insert a piece of filament. You can choose two designs of rotate part. The static part is the same.…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Raplacement part for plastic windows blinds cord holder. Can be used for Otherm Windows.
Settings: Nozzle: 0.4 mm Leyer height: Up to you, I used 0.20 mm No supports needed If this message popsup, look at 4th image and rescale it :) Easy and fast to print!
This is simply a wall mounted spool for wrapping the cord from your blinds. This is a tidy way to keep the cord off the ground.
The original connector part broke, so I made a model and printed it. The inside is 7mm wide, since that's what I needed However it was quite a tight fit, so you may want to play with the size I tried printing it both upright and on it's…
Created a simple spacer to ease the transition from the window blind mount to the wall. This was designed for "allen + roth Cordless Faux Wood 2-in Slat Cordless White Faux Wood Room Darkening Horizontal Blinds" I had a few windows where…
You no longer touch the wall with your fingers (no soiling). Screw or glue tight. To screw together: Two countersunk screws M3 x 14 (up to M3 x 30) For fastening: Two countersunk head spax screws with 3 to 4mm shank diameter. 8 mm of the…
I wanted a nice way to tidy up long cords for window blinds, so I designed this simple cleat to wrap the cord around. I only like to drill holes in the wall when necessary, so I designed this to be mounted with a small Command strip.…
I printed from PLA with 100% infill, 4 walls. I recommend using PETG. I also printed at an angle of 30 degrees, but you can experiment.
Replacement clip to hold a MySmartBlinds solar panel in place. Prints without support. Note that unlike the original clips provided by SmarterHome, these clips do not adjust length . I designed them to the approximate length that my own…
Sometimes the sun can damage this cover, so I thought I'd print it out. Printing is very simple
This part is mounted in the top panel blind clamp and causes the blinds to catch the adjacent blind when being horizontally extended or retracted. The original part broke after ~5 years of use and the manufacturers weren’t helpful in…
zácvak pro šňůrku od rolety okna, ideální pro náhradu u starších plastových oken
This is a mounting piece for the top of generic no brand window blinds
This clip is used to mount a standard blinds / jalousie to a window frame. The commercial ones cost up to 12€, way too expensive. To mount, just hang the clip in on the upper edge of the window frame and push the jalousie up from below…
This clip is used to mount a standard blinds / jalousie to a window frame. The commercial ones cost up to 12€, way too expensive. To mount, just hang the clip in on the upper edge of the window frame and push the jalousie up from below…
Spring tensioner for IKEA FRIDANS roller blinds. To use it, you need to take off the roller blind, put it in the slot on the opposite side of the handle and rotate in the deried direction (watch out, as soon as you put the tool into the…
This is a remix of Window Blinds String Winder Nob by Snille . English In the original "Window Blinds String Winder Nob by Snille" the hole has a diameter of 32 mm. A little too small for my screws, so here the remix where the hole has a…
These fasteners may be useful if the original ones are broken or missing.
The blinds in my daughters room took ages to lower with a manual switch so I decided to change out the manually controlled motor with a wirelessly controlled Somfy IO motor. (so that with one press of a button it goes all the way instead…
A small, easy-to-print model designed to replace the connector piece that links the beaded chains of Heytens roller blinds. Whether the original clip breaks or the chain itself snaps, this connector allows you to quickly reattach the…
Previous rod holders crumbled to dust, so I made a model out of them. Fits ~3.5mm rod, but I attached a fusion file so feel free to modify it for your needs.
Replace pard for Window Blinds Print instructions Category: Household
A quick replacement for the curtain/blinds pull thingy. I think it's called a “pull”, basically the window aglet
Print the top layer with white and the bottom at black for the best experience.
I bought a few venetian blinds for my windows and some of them didn't have the “no-drill” brackets to install them, so ended up printing one. It works for almost every type of blinds/shutter and has been tested with length of 1.5m and a…
Roller blinds curtain attachment for normal curtain rail, adaptor bracket for curtain rail, curtain track holder for zebra blinds, kornise stor perde takma aparati, rollo vorhangschienen adapter …easy to print and fits perfectly
I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…
I liked both designs of this holder, yet I needed it to hold on the wall by itself, like the original non-motorized one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15% Filament: doesn't matter…
I have created simple hook as replacement for broken one on my vertical blinds. It was made more rugged. PLA should be enough.
Model is tuned for PC Blend (Natural), for orientation and print settings see attached 3mf file. I print with MK4 in enclosure at 42 - 46 deg. temp. Spring is 4.5 - 5mm diam, around 10mm long. My blinds insertion hole is ~17mm, but this…
Use this fixture to position your blinds bracket. A spacer is included to evenly space if you have a large window with multiple binds. Alternatively there is a hole guide if you prefer to drill a pilot hole. This was designed for Levolor…
This replacement part was designed to allow the Tropik blinds to be used within an existing frame, the original Tropik blind pull pulls the handle at the extermity of the blinds no allowing the blind frame to fit into a recessed frame.…
Laptop camera blinds This attachment hangs on your laptop screen and limits the viewing field of the 16:9 camera towards the 4:3 view. If you do not feel to share the 180° of your room during teem meetings. I've used it with HP, ThinkPad…
Verschlussstopfen um demontierte Solar Kollektoren spülen zu können. Es werden noch entsprechende O-Ringe benötigt. Zum Drucken muss der Blindstopfen noch auf die Basis gedreht werden… Es gibt noch ein weiters Modell mit einem Gardena…
Supports for window rollers that leave almost no gap between the window and shades, making for a much darker room. Compared to most commercially available supports: Distance between roller and window frame is minimal An additional guide…
I bought these blinds very cheaply from amazon and automated them using Nema17 motors and ESPHome. Many cheap blinds come with exactly the same layout. You will need some experience with electronics to make this project work. Components…
The clutch was a bit redesigned (less sharp edges) and print settings was optimized in order to reduce efforts to insert blinds beads. Print parameters: 0.16mm layer height, 2 wall, 15% rectilinear infill It was printed in PETG (to…
A prefabricated movable blind plug for weighing blinds for roller blinds.
Nothing much today, just some small home improvement: In case you own a KALLAX shelf from IKEA, you might want to close the surplus, predrilled double holes for securing it to the wall with colour matching blinds. I found this a useful…
Simple window blinds adjuster holder to replace a broken one.
Window blinds adjuster connector for two part adjuster arm to replace a broken one.
