P
PrintablesFugin
Poker blinds
Neberte to vážně, doslovný překlad je pouze vtipem
- Downloads
- 10
- Likes
- 4
- Rating
- 0
Search results: blinds
Counting matching models…
P
PrintablesJohnny B Good
Updated Horizontal Motorized Blinds
It's my very first project. (please be gentle) :-) I tried to change the original with 'tinker cad' online For the settings I used : - Wall loops : 5 - Sparse infill pattern : Honeycomb - Enabled Support : YES Style : Snug
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
Printables
Automatic Smart Roller Blinds Mod
I bought these blinds very cheaply from amazon and automated them using Nema17 motors and ESPHome. Many cheap blinds come with exactly the same layout. You will need some experience with electronics to make this project work. Components…
P
Printables
Clutch (clip) for window blinds
The clutch was a bit redesigned (less sharp edges) and print settings was optimized in order to reduce efforts to insert blinds beads. Print parameters: 0.16mm layer height, 2 wall, 15% rectilinear infill It was printed in PETG (to…
P
Printables
Smart home motorised blinds anti-catch dome
Simply print and stick to the bottom of your blind opener to stop your blinds getting caught. Designed to fit the Moes ZigBee blinds opener, should fit others too. Printed narrow so the ports and open tab can still be accessed. Scale it…
P
Printables
Blinds Bottom Clip
Replacing part for blinds. The original one was weak and snapped. Adjust width accordingly to your window size.
P
Printables
Blinds Cord Pulls
Simple cord pulls that were printed with PETG. These were made to replace missing cord pulls of the same shape. The center pull in the picture is an original pull made out of wood.
P
Printables
Puzzle for the blinds (Braille alphabet)
It's a puzzle, but instead of a picture, i printed the Braille alphabet on the pieces. It can be used as a nice gift for blind friends or relatives. The 2 dots on the left upper corner (the horizontal and vertical sides of the frame),…
P
Printables
Eve Motionblinds 38mm tube adaptors
I have several blinds around the house that use the Eve Motionblinds upgrade motor. My issue is that for the 38mm tube, especially the single slot version, positioning the motor centrally in the tube can be hit and miss. The motor itself…
P
Printables
PG29 Blind Stuffing-Adapter to 1xPG7+1xPG9 Cable Gland/ PG29 Blindstopfen-Adapter auf 1xPG7+1xPG9-Kabelverschraubung
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
P
Printables
PG42 Blind Stuffing-Adapter to 5xPG9 Cable Gland/ PG42 Blindstopfen-Adapter auf 5xPG9-Kabelverschraubung
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
P
Printables
Spool-Style Cord Retainer / tensioner for RV Day/Night Shades and/or blinds
The little plastic retainer/tensioner part for the cord running down the height of the window, for "tiltable" blinds.
P
Printables
P
Printables
IKEA Roller blinds solid fittings spare parts
I wore through the original flimsy fittings so i designed and printed new more wear resistant versions
P
Printables
MySmartBlinds solar panel clip (but slightly bigger)
obfuscurity's clip with a longer arm and bigger blind clip
P
Printables
Bracket for roller blinds
The standard mounting for roller blinds doesn't hold well with double-sided tape, so I made a reinforced mount that can be attached using double-sided tape
P
Printables
horizontal blinds mount (uchwyt na żaluzje)(19x25mm)
My (żaluzje) blinds holder (one of 2) broke so I recreate the working one on tinkercad. 2 photos of my print, 2 photos of the working holder and a single photo of broken one. Model is recreating "V10" 19x25mm horizontal blinds Space…
P
Printables
25mm thick closet blinds/bifold/french door magnetic catch
I converted a 25mm thick closet bifold door to french doors by duplicated the bifold hardware on both sides (I didn't want to mount hinges). I made this door catch to keep the new french doors from swinging too far inward as well as…
P
Printables
Updated Horizontal Motorized Blinds
It's my very first project. (please be gentle) :-) I tried to change the original with 'tinker cad' online For the settings I used : - Wall loops : 5 - Sparse infill pattern : Honeycomb - Enabled Support : YES Style : Snug
P
Printables
Blinds DIY ESP32 Homekit&WebUI
You can grab a code and get more info about the project here https://github.com/Andryushik/blinds_homekit_esp32 Created for regular window blinds. With Planetary gearbox (you need 3 x planet_gear for 1 set). You need three M3 bolts with…
P
Printables
RV Blinds Locking Cord Retainer/Tensioner
A replacement for RV blinds cord retainer/tensioner. It was designed dimensionally to what I had in my RV, but I'm guessing it's fairly standard. It is held in place by the same style of screw that would have been in the original part in…
P
Printables
Support Stick Blinds
Size 1 : 25mm x 50mm x 25mm Size 2 : 25mm x 50mm x 20mm Opening : 25mm
P
Printables
MHZ Pleated blinds spare parts
german version below This two models feature a full set of spare parts for the mounting parts of MHZ pleated blinds. Since our ones start to break after 20 years of use. The Clip is quite tight but should hold the pleated blinds. Reuse…
P
Printables
Velux window blinds holder
I needed to remove my window blind holders and broke some of them in the process. These parts are manually modeled after the original ones and are designed to be as much as identical as possible with minor adjustments to make them easier…
P
Printables
blinds-chain cover - žaluzie-krytka řetízku
součástku žaluzie jsem již nikde nenalezl v nabídce prodejců náhradních dílů, nezbylo než navrhnout náhradu
P
Printables
Blinds Bottom Rail Button Plug
Quick fix for broken plug on my blinds. Clean with a drill bit after printing. Size in mm.
P
Printables
Blinds tassel
The original tassel fell apart. I printed in PLA - there is no way it'll be worse than original. Ideally you should print in PETG, but if you only have PLA don't hesitate to use it. Worst case scenario you replace them every 3-4 years.
P
Printables
Battery holder for AC160 battery and Bali Blinds motorized shades
I have some Bali branded ZWave motorized shades that came with 12V battery packs wired to USB micro B connectors (a great way to destroy devices that expect USB 5V power). The battery packs have 8 AA batteries each, and some shades came…
P
Printables
Roller Blinds/Shades End Cap Replacement
Print with 0.2mm profile, Arachne wall generator and Manual supports.
P
Printables
Window blinds string holder
Holds the string of window blinds. Print instructions 1) Print same orientation as the picture 2) Nozzle 0.4mm > as a draft (0.3mm) but you can print with more detail (ex 0.15mm) 3) Possible to print more than 1. I like to print a 3x3…
P
Printables
Venetian blinds tie down knob
A little replacement knob for my venetian blinds. Swedish style.
P
Printables
Horizontal blinds controller
Horizontal blinds controller - no more hanging chains on windows. To open the blind, just turn the controller. To connect both parts just insert a piece of filament. You can choose two designs of rotate part. The static part is the same.…
P
Printables
Plastic window blinds cord holder
Raplacement part for plastic windows blinds cord holder. Can be used for Otherm Windows.
P
Printables
Extension for greater shading by roller blinds / Nástavec pro lepší zastínění roletami
Settings: Nozzle: 0.4 mm Leyer height: Up to you, I used 0.20 mm No supports needed If this message popsup, look at 4th image and rescale it :) Easy and fast to print!
P
Printables
Cord Manager for Blinds
This is simply a wall mounted spool for wrapping the cord from your blinds. This is a tidy way to keep the cord off the ground.
P
Printables
Blinds Tilt Wand Connector
The original connector part broke, so I made a model and printed it. The inside is 7mm wide, since that's what I needed However it was quite a tight fit, so you may want to play with the size I tried printing it both upright and on it's…
P
Printables
Spacer for Window Blinds
Created a simple spacer to ease the transition from the window blind mount to the wall. This was designed for "allen + roth Cordless Faux Wood 2-in Slat Cordless White Faux Wood Room Darkening Horizontal Blinds" I had a few windows where…
P
Printables
Chain guide for vertical blinds
You no longer touch the wall with your fingers (no soiling). Screw or glue tight. To screw together: Two countersunk screws M3 x 14 (up to M3 x 30) For fastening: Two countersunk head spax screws with 3 to 4mm shank diameter. 8 mm of the…
P
Printables
Simple Cord Cleat for Window Blinds (No drilling required!)
I wanted a nice way to tidy up long cords for window blinds, so I designed this simple cleat to wrap the cord around. I only like to drill holes in the wall when necessary, so I designed this to be mounted with a small Command strip.…
P
Printables
Holder for sun blinds in the salon VW Passat B5
I printed from PLA with 100% infill, 4 walls. I recommend using PETG. I also printed at an angle of 30 degrees, but you can experiment.
P
Printables
MySmartBlinds solar panel clip
Replacement clip to hold a MySmartBlinds solar panel in place. Prints without support. Note that unlike the original clips provided by SmarterHome, these clips do not adjust length . I designed them to the approximate length that my own…
P
Printables
Cover for blinds
Sometimes the sun can damage this cover, so I thought I'd print it out. Printing is very simple
P
Printables
Kresta Panel Blinds Catch
This part is mounted in the top panel blind clamp and causes the blinds to catch the adjacent blind when being horizontally extended or retracted. The original part broke after ~5 years of use and the manufacturers weren’t helpful in…
P
Printables
Roleta okna/window blinds
zácvak pro šňůrku od rolety okna, ideální pro náhradu u starších plastových oken
P
Printables
Window Blinds mounting piece
This is a mounting piece for the top of generic no brand window blinds
P
Printables
Blinds / Jalousie window clip
This clip is used to mount a standard blinds / jalousie to a window frame. The commercial ones cost up to 12€, way too expensive. To mount, just hang the clip in on the upper edge of the window frame and push the jalousie up from below…
P
Printables
Blinds / Jalousie window clip
This clip is used to mount a standard blinds / jalousie to a window frame. The commercial ones cost up to 12€, way too expensive. To mount, just hang the clip in on the upper edge of the window frame and push the jalousie up from below…
P
Printables
Spring tensioner for IKEA FRIDANS roller blinds
Spring tensioner for IKEA FRIDANS roller blinds. To use it, you need to take off the roller blind, put it in the slot on the opposite side of the handle and rotate in the deried direction (watch out, as soon as you put the tool into the…
P
Printables
cord winder for blinds (Schnurwickler für Jalousien)
This is a remix of Window Blinds String Winder Nob by Snille . English In the original "Window Blinds String Winder Nob by Snille" the hole has a diameter of 32 mm. A little too small for my screws, so here the remix where the hole has a…
P
Printables
mounting for roller blinds
These fasteners may be useful if the original ones are broken or missing.
P
Printables
Faher to Somfy blinds/screen motor adapter 63mm round tube
The blinds in my daughters room took ages to lower with a manual switch so I decided to change out the manually controlled motor with a wirelessly controlled Somfy IO motor. (so that with one press of a button it goes all the way instead…
P
Printables
Bead Chain Connector for Heytens Roller Blinds
A small, easy-to-print model designed to replace the connector piece that links the beaded chains of Heytens roller blinds. Whether the original clip breaks or the chain itself snaps, this connector allows you to quickly reattach the…
P
Printables
Window blinds rod holder
Previous rod holders crumbled to dust, so I made a model out of them. Fits ~3.5mm rod, but I attached a fusion file so feel free to modify it for your needs.
P
Printables
Blinds Control Chain Holder
Replace pard for Window Blinds Print instructions Category: Household
P
Printables
Blinds/Curtain Pull
A quick replacement for the curtain/blinds pull thingy. I think it's called a “pull”, basically the window aglet
P
Printables
Blindspot for growDECK
Print the top layer with white and the bottom at black for the best experience.
P
Printables
Blinds Shutter bracket Venetian clip no drill
I bought a few venetian blinds for my windows and some of them didn't have the “no-drill” brackets to install them, so ended up printing one. It works for almost every type of blinds/shutter and has been tested with length of 1.5m and a…
P
Printables
Roller blinds curtain attachment for normal curtain rail, adaptor bracket for curtain rail, curtain track holder for zebra blinds, kornise stor perde takma aparati, rollo vorhangschienen adapter
Roller blinds curtain attachment for normal curtain rail, adaptor bracket for curtain rail, curtain track holder for zebra blinds, kornise stor perde takma aparati, rollo vorhangschienen adapter …easy to print and fits perfectly
P
Printables
Motorized Blinds Tilt Servo Control through Home Assistant
I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…
P
Printables
Motor on JYSK roller blinds with 608ZZ bearing and wall holder
I liked both designs of this holder, yet I needed it to hold on the wall by itself, like the original non-motorized one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15% Filament: doesn't matter…
P
Printables
Vertical blinds holder
I have created simple hook as replacement for broken one on my vertical blinds. It was made more rugged. PLA should be enough.
P
Printables
Parametric blinds holders
Model is tuned for PC Blend (Natural), for orientation and print settings see attached 3mf file. I print with MK4 in enclosure at 42 - 46 deg. temp. Spring is 4.5 - 5mm diam, around 10mm long. My blinds insertion hole is ~17mm, but this…
P
Printables
Blinds bracket fixture
Use this fixture to position your blinds bracket. A spacer is included to evenly space if you have a large window with multiple binds. Alternatively there is a hole guide if you prefer to drill a pilot hole. This was designed for Levolor…
P
Printables
Replacement finger pull for Tropik pull up/down pleated blinds
This replacement part was designed to allow the Tropik blinds to be used within an existing frame, the original Tropik blind pull pulls the handle at the extermity of the blinds no allowing the blind frame to fit into a recessed frame.…
P
Printables
laptop camera blinds
Laptop camera blinds This attachment hangs on your laptop screen and limits the viewing field of the 16:9 camera towards the 4:3 view. If you do not feel to share the 180° of your room during teem meetings. I've used it with HP, ThinkPad…
P
Printables
Blindstopfen Brötje Solar-Kollektor
Verschlussstopfen um demontierte Solar Kollektoren spülen zu können. Es werden noch entsprechende O-Ringe benötigt. Zum Drucken muss der Blindstopfen noch auf die Basis gedreht werden… Es gibt noch ein weiters Modell mit einem Gardena…
P
Printables
Gapless window roller blinds support
Supports for window rollers that leave almost no gap between the window and shades, making for a much darker room. Compared to most commercially available supports: Distance between roller and window frame is minimal An additional guide…
P
Printables
Automatic Smart Roller Blinds Mod
I bought these blinds very cheaply from amazon and automated them using Nema17 motors and ESPHome. Many cheap blinds come with exactly the same layout. You will need some experience with electronics to make this project work. Components…
P
Printables
Clutch (clip) for window blinds
The clutch was a bit redesigned (less sharp edges) and print settings was optimized in order to reduce efforts to insert blinds beads. Print parameters: 0.16mm layer height, 2 wall, 15% rectilinear infill It was printed in PETG (to…
P
Printables
blind weighting tube plug for roller blinds
A prefabricated movable blind plug for weighing blinds for roller blinds.
P
Printables
IKEA - shelf KALLAX apperture blinds
Nothing much today, just some small home improvement: In case you own a KALLAX shelf from IKEA, you might want to close the surplus, predrilled double holes for securing it to the wall with colour matching blinds. I found this a useful…
P
Printables
Window blinds adjuster holder
Simple window blinds adjuster holder to replace a broken one.
P
Printables
Window blinds adjuster connector
Window blinds adjuster connector for two part adjuster arm to replace a broken one.
P
Printables
Customizable/parametric vertical blinds hanger
Hanger for vertical blinds with rounded sides and customizable dimensions.
P
Printables
Ikea Fyrtur Blinds Bracket (no trim)
I printed with 5 walls, 15% infill, no supports. seems very sturdy so far. I will probably end up printing these in white in the future so they blend in a bit better. Important Dimensions: keeps blinds 25mm from the wall How to mount: 1.…
P
Printables
Cord cleat for window blinds
Cord cleat for window blinds. The one that came with the blinds was too flimsy and little.
P
Printables
Pleated blinds, screw mounting
I remixed the original so you can just hang it on windows like standard blinds hooks , and i added a coin size hole on the screw so you can tighten it.
P
Printables
Simple Motorized Roller Blinds
Simple motorized blind, gearless, for those of us who don't have a perfectly calibrated printer. It's an addition to @Lush_727880's model, where the mounting method has been changed, eliminating the need for screws and attaching the…
P
Printables
Cover For Automatic Blinds V1
Made this model to cover the hole in the side cover of my windows because before the blinds were manual and now automatic. Dimensions: L:200mm Hole: 6mm with cone from 8mm W:55mm Hole position: center of W and 20mm from top H: 2MM
P
Printables
StyleWell HomeDepot Blinds Spacer
Print with 5+ walls and 100% infill for support. This spacer is specific to the StyleWell model of blinds sold at HomeDepot. Specifically designed to go above a window frame on a door when the frame gets in the way of the blinds. Fusion…
P
Printables
Smart home motorised blinds anti-catch dome
Simply print and stick to the bottom of your blind opener to stop your blinds getting caught. Designed to fit the Moes ZigBee blinds opener, should fit others too. Printed narrow so the ports and open tab can still be accessed. Scale it…
P
Printables
Flex bumper for blinds.
When there's enough wind, my blinds go back and forth and hit the window's metal frame, making lots of noise. So i made a flex bumper for it. If you liked this thing enough (and was hopefully useful!), please consider supporting me via…
P
Printables
chain lock (holder) for blinds
It is a standard chain holder for blinds as a spare part. It's plain white PLA and that's enough, and the layer height is 0.10mm and the infill is 100% and I recommend 3 perimeters. Thank you and good luck
P
Printables
Blinds connector - spare part for the connection between mounts and blind
Ersatzteil für die Verbindung zwischen der Halterung und dem Rollo selbst. Spare part for the connector between the mounts and the blinds themselves.
