TGT2 GT3 Wheel Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GT3 wheel mod to replace the standard GT wheel from the T-GT and T-GT2 thrustmaster sim racing wheel set
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Standard Digital File License
This was a project to see if I would enjoy a GT3 wheel before proceeding with an official unit, printed in PLA+ it is very strong and only used a few hundred grams all up.
You will require some extended hardware to bolt it all together, from memory I think the M3 screws were 1-2mm longer and you will need some M5 screws and nuts for the handles. The handles hole tolerance is very tight, this removes any need to align the handles with the base. You will also need some extended M4 screws to mount the base to the 3 pillars from the quick release, these are critical to have installed.
You will need a 300 x 300 bed to print this
PLA+
K1 MAX
3-4 walls
25% infill Triangles or Tri-Hex