Cheap FPV Gimbal - Pan/Tilt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cheap FPV Gimbal using SG90 servo (Tower and Low profile)
- Ocena
- 4,6 / 5
- Polubienia
- 284
- Pobrania
- 1477
- Wydruki
- 5
- Wyświetlenia
- 6764
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cheap FPV gimbal for pan/tilt axis. This is designed around common servo, easily found in every online marketplace.
The camera used is a old Eachine 1000TVL, but a found the exact same with a different brand. Adaptator for different camera should be doable easily.
There is two base, one tower like, and one low profile when you don't have enough room.
Some part needs support to be printed correctly, (bases for example)
BOM:
- 2X SG90 servo - Link (Amazon US affiliate)
- 1X Mini 1000TVL FPV Camera - Link (Amazon US affiliate)
UPDATE 10/18/2024 : updating tower base with notch on each side
UPDATE 11/11/2024 : uploading missing file Eachine1000TLV mount. Thx to Juhani to notify me.
Assembly (Photo tutorial) :
Choice 1 - Tower Base:
Install the servo in the base and secure it with the provided screws
Center the servo with your preferred method, and use the cross provided with the servo in the top part 2 and attach it with the provided screw
Choice 2 - Low profile Base:
Install the servo in the base and secure it with the provided screws. Use the printable cross, and the pan gears. Secure with a M2x6 screw.
Camera mount:
Use 2X M2x8 screw to attache mount to camera.
Use 2X M2x12 screws on the side with the camera gear, and 2X M8 screws on the other side, and attach the camera mount as pictured.
Finally attach this part to the bottom one with 4X M2x6 screws.
Center servos and attach the ¼ gear with the screw provided with the servo.
And for low profile base
That's it !
Let me know if something isn't clear or missing.