Pololu Micro Metal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of a Pololu Micro Metal dc motor
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I made this model a while back when I started learning how to 3d model, and I've used it quite a lot for projects, since micro metal motors are very versatile. I hope you find it as useful as I have for all these years.
All the measurements have been taken either with blueprints on the intenet (theres quite a few) or with a dial caliper and my own pololu micro metal.
I made up the module and number of teeths on the gears, but they should work, just in case anyone was wondering.
The screws are philps flat headed screws with a 6mm thread diameter taken from the McMaster-Carr component 3d library in Fusion 360 (nº 91305A005).
I also uploaded here a basic shape version if anyone wants it just for the measures.