Pololu Micro Metal
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A model of a Pololu Micro Metal dc motor
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 56
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I made this model a while back when I started learning how to 3d model, and I've used it quite a lot for projects, since micro metal motors are very versatile. I hope you find it as useful as I have for all these years.
All the measurements have been taken either with blueprints on the intenet (theres quite a few) or with a dial caliper and my own pololu micro metal.
I made up the module and number of teeths on the gears, but they should work, just in case anyone was wondering.
The screws are philps flat headed screws with a 6mm thread diameter taken from the McMaster-Carr component 3d library in Fusion 360 (nº 91305A005).
I also uploaded here a basic shape version if anyone wants it just for the measures.