MK4S xLCD (new type) mount adapter for original Prusa enclusure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To mount the MK4S xLCD new type (version A) on the front of the Prusa enclosure, not blocking the doors, closed gap too
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 109
- Wydruki
- 2
- Wyświetlenia
- 703
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Owners, upgrading to the MK4S within the original Prusa enclosure need an adapter to mount the new version of the xLCD (version A) on the front. The new housing of the xLCD (2 moulded parts) does not fit on the enclosure without blocking the doors.
This adapter provides the space needed to open/close the doors and also covers the gap between the xLCD and the enclosure.
Print information: use PETG and print with supports, see the picture or use the .3mf file
Assembly information:
- use two M3n nuts, included in the upgrade pack, put it in the 2 hexagonal spaces at the front of the adapter
- use two 3x12sT scews, included in the upgrade pack, to attach the adapter to the xLCD, use the lower holes, see picture of the xLCD back side.
- use two M3x8 screws to mount the xLCD assy to the enclosure.