Magsafe Ball Joint Mount 17mm Female Centered
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Apple Magsafe charger holder with a centered female 17mm ball joint receiver and accompanying nut for tightening
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 829
- Wydruki
- 2
- Wyświetlenia
- 3062
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is similar to the one it remixes, but the magsafe puck is on the same axis as the 17mm ball joint threads. I am using it with a third party Magsafe charger that has a stronger magnet than the Apple charger, but has identical dimensions otherwise.
The one I use in my truck was printed with Bambu Lab Translucent PETG on default settings and has been holding up fine for several months, along with a 17mm dash mount adapter.
The included 3mf is how I would print it if I needed to again, using ABS, more walls, and 0.16 layer height for improved thread accuracy.
I've included the blender file, but be warned that it might be a bit of a mess as this was one of the first models I created after getting into 3d printing.