Discovery 2 clutch slave rod clip install tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool for installing clip, which hold the clutch slave cylinder rod. Land Rover Discovery 2 Td5 clip part number 576723.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Some another clutch tips:
- TD5POWERSLAVE is really good for long travels. Pedal is much softer.
- On some LH cars is clutch pressure sensor on the right side. It is possible to mount this sensor directly to unused hole inside of a main clutch cylinder. Hydraulic tube then can be replaced with much shorter flexible stainless tube.
FreeCAD 1.0 source file attached. If you are happy with this tool, you can donate few bucks here https://www.freecad.org/sponsor.php.
Clip 576723 is probably also used on these cars:
Land Rover Series 3 (1971 - 1984)
Defender (1987 - 2006)
Discovery 1 (1989 - 1999) V8
Discovery 2 (1998 - 2004) Td5, V8
Range Rover Classic (1987 - 1995) VM, V8
How to use:
Insert slave cylinder bolts and use them to fix clutch lever with piece of wire in steady position. Use molybden grease to rod seat. Carefully insert clip to the tool and just use it.
Fix with zip tie.
