OGX-Mini PCB Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had previously designed a case for an OGX-Mini with a USB PCB board and a Pico but the creator of OGX-Mini also…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 707
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I had previously designed a case for an OGX-Mini with a USB PCB board and a Pico but the creator of OGX-Mini also released a PCB, I've recently built up one of those too and designed this case to fit it.
It clips together and has a push button for the boot button, I didnt do one for the reset as I dont think its really needed. I tried to leave a little wiggle room around the ports either side just incase the line up of the USB port and Pico isnt exact (like mine :) )
Should hopefully do the job well enough.
Category: Electronics