Honda Transalp Neon Sign (LED)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 80s Transalp Logo was made to kind of resemble old neon signs. It was inspired by the lettering on the side of my…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
This 80s Transalp Logo was made to kind of resemble old neon signs. It was inspired by the lettering on the side of my '87 Honda Transalp XL600V.
Building instructions down below:
Print Settings
Printer Brand:
Anycubic
Printer:
i3 Mega
No
Supports:
No
0,2
Infill:
100%
Building Instructions
For easier printing, it was seperated into all letters, which then have to be glued together.
Try to glue them together on an even surface with the upper layer (not the side with the bracing) down, to have a perfectly flat surface so you won't have problems with light leaking out later. In addition to that, use a ruler or something really straight/even to ensure that the letters are also in line and you have a flat bottom!
Then install the led strip. Push it as deep in the corners as you can without destroying it.
Route all cabels out the back (backside is the side with the bracing struts).
Now glue the assembly with the front onto a PC (Polycarbonate) Plate and cut it out. For me a hacksaw with a blade for metall worked best, and a file to smooth everything out.
glued together
before cut out
after cut out
Category: Signs & Logos