1 / 11
Honda Transalp Neon Sign (LED) — image 1
1 / 11

Honda Transalp Neon Sign (LED)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This 80s Transalp Logo was made to kind of resemble old neon signs. It was inspired by the lettering on the side of my…

Rating
0 / 5
Likes
5
Downloads
13
Makes
0
Views
176
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This 80s Transalp Logo was made to kind of resemble old neon signs. It was inspired by the lettering on the side of my '87 Honda Transalp XL600V.

Building instructions down below:

Print Settings

Printer Brand:

Anycubic

Printer:

i3 Mega

**Rafts:**

No

Supports:

No

**Resolution:**

0,2

Infill:

100%

**Filament:** Anycubic PLA blackPost-Printing =============

Building Instructions

For easier printing, it was seperated into all letters, which then have to be glued together.
Try to glue them together on an even surface with the upper layer (not the side with the bracing) down, to have a perfectly flat surface so you won't have problems with light leaking out later. In addition to that, use a ruler or something really straight/even to ensure that the letters are also in line and you have a flat bottom!
Then install the led strip. Push it as deep in the corners as you can without destroying it.
Route all cabels out the back (backside is the side with the bracing struts).
Now glue the assembly with the front onto a PC (Polycarbonate) Plate and cut it out. For me a hacksaw with a blade for metall worked best, and a file to smooth everything out.

glued together

before cut out

after cut out

Category: Signs & Logos

Tags