Hygrometer Temp-Humidity Post Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rectangular Hygrometer bracket to mount on hex hole on top of the Prusa MK3S printer
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I have seen different Hygrometer mounts and decided to make my own. 2 versions because the hex hole is offset. One version of the mount can be placed 60degess offset if that is what is preferred or my preference is to view the temp/humidity directly at me. Both version can be printed on its side with no support required & used PLA. This mount makes it easy to remove in case its in the way or for working on the printer.
Used 20% infill with .4mm nozzle
This is the rectangular Hygrometer from Amazon used for this mount:
https://www.amazon.ca/dp/B0875WL8LF?ref=ppx_yo2ov_dt_b_fed_asin_title