Universal EMT Conduit Wall Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mounting bracket allows you to create an inexpensive hanger for any wall using easily sourced EMT conduit + screws.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This mounting bracket is designed to securely attach 3/4-inch EMT conduit to a wall using #8 x 1-1/4 inch screws. It's a versatile solution for creating custom pan hangers or other wall-mounted storage systems, offering a sturdy setup for hanging items like pots, pans, or tools.
The bracket is compatible with standard ¾-inch EMT conduit, readily available at most hardware stores. EMT conduit must have an outside diameter of 23.5mm (approximately 15/16 inches) to guarantee a proper fit.
There are two versions available: one optimized for horizontal printing and the other for vertical printing. The vertical version omits corner fillets to maximize space on your print bed, but both options provide the same strong and reliable performance.
Printing:
Material: PETG or PLA
Layer Height: 0.2mm
Infill: 40%
Perimeters: 3
Supports: Tree or Organic Supports recommended
Orientation: Horizontal or Vertical
Print horizontally if maximum strength is desired.
Print vertically if not used in a loadbearing application. (i.e. towel rack)