The Space Invader Keycap collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keycap set for space invader switches includes various profiles some are unfinished tho.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Introduction
So these are key caps for a switch called Hi-tek 725 switches AKA space invaders I made these key caps around may 2023 as not too long ago I got an RT101 with some of the key caps missing and in a bad shape, after I restored them I realized that I will have a hard time getting some spare key caps, so I ended up making my own.
I spent a lot of time designing these keycaps and only for it to be collecting dust in my account, id rather just share it with whoever finds this useful!!
Previously while I was disassembling it I broke one of the stab pieces that attaches to the plate, I ended up designing those too
You must print these key caps on resin all of the fitment and tolerances I did was with a resin printer.
The space bar hasn't been tested it wont fit do some tolerance testing and adjust them.
One thing I highly suggest you try is to heat cure them if you can of course:
Credits to cnckitchen for the video!