movable model of a four-stroke engine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to design a four-stroke engine model on my own :) All you need is a 3d printer and some adhesive. If you want…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 719
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to design a four-stroke engine model on my own :)
All you need is a 3d printer and some adhesive.
If you want to you can use two or more cylinders in a series switching to create an in-line engine. The best example would be the engine of the Audi RS3.
The engine size is about 68,7 cm³ and it will take about 7:45 h to print one model (75mm/s).
You will have to print "welle.stl" twice and if you want to build a in-line engine you need "muffewelle.stl", too.
Check out my other designs here on thingiverse :)
Print Settings
Printer:
CTC Bizer Dual
Rafts:
Doesn't Matter
Doesn't Matter
Resolution:
0,2
10%
Notes:
Printed in HatchBox black transparent.
Category: Engineering