movable model of a four-stroke engine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to design a four-stroke engine model on my own :) All you need is a 3d printer and some adhesive. If you want…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 0
- Views
- 719
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to design a four-stroke engine model on my own :)
All you need is a 3d printer and some adhesive.
If you want to you can use two or more cylinders in a series switching to create an in-line engine. The best example would be the engine of the Audi RS3.
The engine size is about 68,7 cm³ and it will take about 7:45 h to print one model (75mm/s).
You will have to print "welle.stl" twice and if you want to build a in-line engine you need "muffewelle.stl", too.
Check out my other designs here on thingiverse :)
Print Settings
Printer:
CTC Bizer Dual
Rafts:
Doesn't Matter
Doesn't Matter
Resolution:
0,2
10%
Notes:
Printed in HatchBox black transparent.
Category: Engineering