1 / 1
Sunlu S2 Desiccant / Silica Dryer Tray (Higher Walls)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Like the original 2mm version but with higher walls
- Ocena
- 4,727 / 5
- Polubienia
- 37
- Pobrania
- 338
- Wydruki
- 14
- Wyświetlenia
- 1019
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 14) (Komentarze: 17)Remiksy (0)Kolekcje (83)Powiązane
This is just a quick remix.
I raised the walls by 10mm, added chamfers to the bottom, and closed the gap at the back on the inside, as desiccant often gets stuck there.
Prints well without Supports
PETG recommended for drying