Rubber plug for wood worm treatment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The plug is used to fill nearly horizontal 10 mm diameter bore holes with woodworm treatment liquid.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
The plug is used to seal the end of 10 mm bore holes in a wooden beam, so that it can be filled with liquid for woodworm treatment. One of the beams in my hut needs it desparately.
Due to geometrical limitations I can only drill nearly horizontal holes. Filling these without a plug is not possible, because the liquid would simply flow out.
The hexagon pocket in the plug is needed to make placing the plug easier.
There is a small slot at the outer perimeter, so that a syringe needle can be fed through, once the plug is in place. 
Using a syringe, the hole can be filled with liquid.
I printed with 4 perimeters and 5° higher temperature using Filatex Flex40.