Rubber plug for wood worm treatment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The plug is used to fill nearly horizontal 10 mm diameter bore holes with woodworm treatment liquid.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
The plug is used to seal the end of 10 mm bore holes in a wooden beam, so that it can be filled with liquid for woodworm treatment. One of the beams in my hut needs it desparately.
Due to geometrical limitations I can only drill nearly horizontal holes. Filling these without a plug is not possible, because the liquid would simply flow out.
The hexagon pocket in the plug is needed to make placing the plug easier.
There is a small slot at the outer perimeter, so that a syringe needle can be fed through, once the plug is in place. 
Using a syringe, the hole can be filled with liquid.
I printed with 4 perimeters and 5° higher temperature using Filatex Flex40.