Creality K1 and K1 Max Door Seal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seal the gap on your K1 / K1 Max door! Should work with any 270° hinge or similar.
- Ocena
- 5 / 5
- Polubienia
- 256
- Pobrania
- 1670
- Wydruki
- 10
- Wyświetlenia
- 8303
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update on size/shrinkage comp: This model will most likely be too large if using shrinkage compensation with ABS or ASA. Try changing shrinkage comp to scale up by 0.05% (99.95% in Orca), that is what worked well for me with ASA. Apologies, I was less informed and worse at designing when I created this.
CAUTION!! THIS REQUIRES REMOVING THE DECORATIVE TRIM BESIDE THE DOOR.
This model will NOT work with the stock hinge!!
- Remove trim piece.
- Remove excess adhesive.
- Install new seal.
It's that easy!
I really liked the door seal model that @TianZi created for their 270° hinge system and was using it with the geared hinge by @Mordiev.
I scaled their model to fit my K1 Max, but wanted to create my own to avoid measurement issues and remove the holes that served no purpose due to me not using the TianZi hinges.
I recommend using a heat resistant material such as PETG or ABS, and using a 0.2 layer height.