Grainfather 30litre Home Brew Kettle Seal Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was absolutely fed up with the silicon ring seals that come with the unit so decided to investigate an alternative
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The Grainfather brewing kettle is great but the silicon ring seals that come with it drove me mad as they would not sit properly easily.
This is version 1 of an idea and seems to work well.
Must be PETG really or better as it needs to work in up to 75 deg Celsius. PLA melts at too low a temperature, or gets soft at least.
I split the model into 8 pieces and put a flat edge on it to make printing easier. You will need supports. I have included Gcode for the MK4.
It does not have to be totally round it would seem as the gaps are small.
A quick sand with 240 grit paper will knock any bits off and away you go.
I am very keen to hear any feedback.
Model is on Onshape.
