Grainfather 30litre Home Brew Kettle Seal Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was absolutely fed up with the silicon ring seals that come with the unit so decided to investigate an alternative
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
The Grainfather brewing kettle is great but the silicon ring seals that come with it drove me mad as they would not sit properly easily.
This is version 1 of an idea and seems to work well.
Must be PETG really or better as it needs to work in up to 75 deg Celsius. PLA melts at too low a temperature, or gets soft at least.
I split the model into 8 pieces and put a flat edge on it to make printing easier. You will need supports. I have included Gcode for the MK4.
It does not have to be totally round it would seem as the gaps are small.
A quick sand with 240 grit paper will knock any bits off and away you go.
I am very keen to hear any feedback.
Model is on Onshape.
