Rotary Tool Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This tool clamp is a simple jig to allow fixed mounting of the tool in a vise or can be squeeze clamped to a table.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a simple tool clamp that allows the rotary tool to be mounted in a vise for hands-free operation. There is also an 25mm square accessory block which can be used on the opposite end of a wood vise to prevent racking if desired (see photo). The clamp is tightened with a 3/16" bolt. It was a quick solution to a need. The tool is a Dremel Multi-Pro model 395.
The gcode provided for the clamp is set for an 80% infill at the clamp end and part of the 25mm square shaft. The remainder of the shaft is a 15% infill. The print is pteg, 0.2mm layer height, and 0.4mm nozzle.