1 / 1
The Elder Straw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
I used PETG for food safeness.
I had a 0.6 nozzle installed so I did a 1.2mm wall. That version has a 5mm hole, which is standard drinking straw. But I am uploading a version scaled down to 0.8 wall, which has a 3.3mm hole. Fine for cocktails.
z256 for bambu printers. If youve got a bigger z height can try the 300 size. (the 256 version is a combo of scaling in z and chopping the tip off)
Print with a brim/supports for stability and to help with the bulby parts.
original model by jake on thingiverse